Used Cushion Tire Forklift Burbank - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
There are drawbacks and benefits to both pneumatic and cushion forklift tire options. The cushion tire benefits and drawbacks can only be understood in the context of what the pneumatic tire offers in terms of forklift operation.
Forklift Tire Classifications
Cushion Tires
Cushion tires are made up of either smooth or treaded solid rubber and are designed around a metal ring or baseband. Cushion tires cost less to make and are easier to take care of. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. These tires are designed to maneuver well within tight locations, due to their specific turning radius. Cushion tires also allow the forklift to sit closer to the ground. The advantage of a lower forklift is the increased vertical clearance when compared to forklifts with pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The forklift designed for use with cushion tires, is intended to be used mostly indoors, with some limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Indoor forklift models that use cushion tires feature lower clearance compared to pneumatic tire models. This enables the machine to travel through doors and navigate obstacles such as sprinkler systems ad lights much easier.
3) Durability
With little to no risk of a tire puncture, cushion forklift models are easy to maintain and ultra-durable.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
Most forklift frames only allow for either a cushion tire or a pneumatic tire. The forklifts’ lifting capacity and frame are specific to the axles and tires in the design. Most forklift manufacturers design forklifts to operate safely with specific wheels and tires, namely cushion tires or pneumatic tires. Because of this, it is more useful to choose the best forklift type, considering the type of tires the forklift will require and how it fits the job application, rather than attempting to modify the forklift by choosing the right tire for the application.
Workplace Applications
Suitable Work Applications for Cushion Tires
There are many work applications suitable for using cushion tire forklift models. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Cushion tire forklifts typically feature a smaller frame and sit much lower to the ground compared to pneumatic tire models. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. It is important to note that cushion tire forklifts showcase less ground clearance and the machine may get caught up on exterior obstacles if the ground is uneven. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. Pneumatic tire forklifts are longer and wider than cushion tire forklifts which is why they are primarily used outdoors.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. This is because a solid pneumatic tire is not susceptible to punctures or gouges because they are made of solid rubber and do not have air in them. These solid pneumatic tires are best for scrap yards and lumber yards where the possibility of running over sharp metal scrap and debris, such as nails, in greatly increased. Air pneumatic tires work great outside on gravel and asphalt applications. The main issue with air pneumatic tires is their ability to become gouged or punctured. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Since air-filled tires deliver a bouncy sensation, they contribute to operator fatigue and discomfort. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Flat tires can be filled with foam to keep them more durable and prevent flats. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
The load capacity of cushion tire forklifts and pneumatic tire forklifts are about equal. There may be lift limits on certain electric-powered cushion tire models. Pneumatic tire and cushion tire forklifts are available in practically any load capacity. These machines come in different load capacities from under 2000 lbs. to over 200,000 lbs. depending on your application.
Cushion Tire Forklift PDF
