In the majority of cases, most people spend quite a lot of money purchasing their lift truck. Therefore, it is extremely essential to take proper care of it so as to protect your investment well into the long run. It is really a good idea to know the procedures that are carried out in maintaining and taking care of this equipment.
Amongst the best ways to tell how good the engine is working is by starting the forklift up and listening closely to see how it runs. Like for instance, if there are any misses or knocks, the machinery is defective and this should raise several concerns. What's more listen closely for any squealing sounds which come from the belts because these noises would provide you with a lot of information.
When doing maintenance, several of the main parts you would need to pay attention to comprise the safety warning devices, horn, the lights, the gauges and the overhead guard. Any faulty parts or burnt out light bulbs must be replaced as soon as they are noticed. It is also vital to check the wiring.
The battery compartment terminals should be cleaned after the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Every cell of the battery needs to be checked so as to make sure that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
After the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make certain to apply some grease. Inspect the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Afterwards, check every other part of the equipment including the wheels. If any type of problem or fault is detected, be sure to address it immediately in order to make sure the equipment is running at its safest and optimum levels.