Propane Tank Rules
The gas container, LP System or liquefied petroleum system is a collective term by OSHA that refers to the piping, regulators, hoses, regulators, valves and fittings. Depending on the tank capacity, the agency requires specific parts. These individual components have to go trough recognized laboratory testing. The correct laboratory approval will prove that the system components meet construction, pressure and thickness standards.
Tank Location
The organization OSHA determines how near the propane tank can be mounted in relation to buildings, to ignitable materials, to tanks that contain flammable liquids, welders and cutting torches. These strict regulations are in place to make the jobsite as safe as possible for the workers and those others who are nearby.
Nameplate Marks
LP systems require that the address, the name, the container supplier, and or the tanks brand name, be marked on the propane container. The container capacity is to be listed with the following details: pounds or gallons of fuel, square foot outside surface, fill level, and pressure. In addition, information regarding whether or not the container is designed to be installed underground or above ground is also visible. These markings must be on a metal plate connected to the container somewhere visible. OSHA requires that every tank needs to be marked by the Pressure Vessel Inspectors and National Board of Boiler in order to be considered ready and safe to use.
Tank Modifications and Repairs
OSHA also regulates any maintenance to the LP systems, like welding. The workers performing repairs and the tank owners must know the regulatory codes and standards that the tanks were manufactured. Welding repairs to any component of the system which is subject to internal pressure must first comply with these fabrication codes. Other welding is just permitted on lugs, brackets or saddle plates.
OSHA has worked hard to make certain that those working with forklifts and individuals working in the vicinity of forklifts are kept as safe as possible. They have stringent regulations and training procedures in place so as to make certain that these industrial equipment and their repair processes are handled with respect and as safe as possible. It is really essential that businesses follow their rules and steep fines can happen if they are not adhered to.