Forklift Attachments Burbank - Without forklift attachments, many jobs would be difficult, if not impossible. There are numerous forklift attachments that make jobs faster and safer to complete. Besides regular forklift training, operators also need to undergo proper training for every attachment they will be using.
Forklift attachments come in a wide variety of hydraulic and non-hydraulic attachments. The benefits of utilizing a forklift attachment include decreasing:
1. Employee accidents;
2. Damage to stock;
3. Manpower;
4. Time; and
5. Fuel consumption.
Equipment Considerations
A forklift attachment can replace an existing forklift attachment or can be added to a forklift that does not already have one. There are many equipment factors to consider prior to adding or replacing any forklift attachments. Considerations include the carriage type, the forklift model, the capacity of the forklift and the number of hydraulic functions used to power the features of the attachment.
Failure to properly consider these factors will increase the safety risk associated with operation of a forklift and its attachments and increase the risk for damage to the forklift, the attachment and surrounding area, including stock. Further safety factors must also be taken into consideration, which will be discussed in greater detail below.
Forklift Rating and Re-Rating
These machines are provided with lift capacity ratings from the manufacturer that need adjusting when changing or adding any forklift attachments. Online calculators are available from manufacturers of forklift attachment’s to provide estimates on every attachments’ lifting capacity. However, only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. There will be a new specification plate that is factory authorized once the forklift manufacturer has re-rated the machine. This new specification plate will replace the original plate and should be installed showing the new rating for the forklift.
Equipment Upgrades
Forklift attachments rely on the machine’s hydraulic function and are made up of a forklift valve that has a lever situated close to the operator. This creates two passages of pressurized hydraulic oil for powering the attachment features. Note that not every attachment is hydraulic; however, the hydraulic attachments provide more features compared to the number of valves the forklift offers. When this happens, the forklift needs to have one or more valves added. There are numerous ways a valve can be added. There are many ways to add a forklift valve.Equipment manufacturers make forklift accessories for hose routing and valve placement. There are plenty of labor and parts involved which can be costly enough to make this an impractical solution. Other options include adding a cable reel and a hose in conjunction with a solenoid valve to divert oil from an existing location. Unfortunately, hose and cable reels can sometimes block the operator's view and can be easily damaged. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. Because these hoses replace the existing hoses housed in the forklift, the hoses are safe from damage while keeping the operator’s field of vision clear.
Safety Considerations
Prior to fitting any type of forklift attachment, proper training must be obtained. Operators need to be competent with removing, operating and fitting the attachment before using it.
There are 2 vital safety factors to think about before operating any type of forklift attachment.
The nominal load rating will be reduced on the forklift once any attachment is applied. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Using any type of forklift attachment will affect the center of gravity on the machine. The forklift’s stability will be reduced and this needs to be computed for safety. Due to the attachment weight being situated in front of the fulcrum point, the forklift needs to be driven as though it is partially loaded even when it is empty. It is essential that operators travel slowly and make gentle turns when using any kind of forklift attachment. As noted above, each attachment should be listed on the data plate of the forklift’s capacity.
To maintain safety, special checks need to be completed before using any forklift attachment. The forklift attachment needs to be the right one for the type of forklift being used, appropriate for the load at hand, correctly attached, locked in place and permitted on the data plate of the forklift.
List of Common Forklift Attachments
A list of the most common attachments and their general uses are set out below. This is just a sample list of some of the most popular forklift attachments. The variety of attachments can drastically increase efficiency for many jobs.
SIDESHIFTER:
The operator can manipulate the forks laterally with a sideshifter. This allows for easier load placement without having to move the entire forklift.
FORK POSITIONERS:
Moves the forks together or apart in relation to one another to adjust for various load types.
DIMENSIONING DEVICES:
Dimensioning devices offer cargo dimensions to create more warehouse efficiency and better truck and trailer space. This is commonly used with billing systems that record volume.
ROTATOR:
Rotators help to right tilted skids and are useful for fast unloading and tackling custom load requirements. Many attachments include a rotator feature.
ROLL AND BARREL CLAMP:
Allows for grasping of load with a rounded shape, such as rolled material and barrels, often with various pressure setting to avoid damage to more fragile materials. These attachments sometimes also have a rotate function to assist with, for example, rotating an item from a horizontal to a vertical position.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Long, metal pole used in place of forks to lift rolled items such as carpet or linoleum.
SLIP SHEETER OR PUSH-PULL:
The slip sheeter or push-pull allows the operator to move sheets by clamping onto slip sheets. This is an option instead of relying on pallets. The slip sheet can be moved onto thin and wide metal forks to simplify loading or unloading by pushing the slip sheet. The “Save” variation allows the slip sheet to be taken off for reuse later. The “Standard,” attachment variation is another option.
DRUM HANDLER:
The drum handler is specifically designed to transport drums. It might feature arms to hold the drum or be a spring-loaded model to grip the top lid.
DRUM AND STORAGE BIN TIPPER:
Allows for quick transfer of loose or liquid contents in large containers.
MAN BASKET:
Lift platform meant for lifting workers and complete with railings and brackets for safety harnesses.
TELESCOPIC FORKS:
The telescopic forks are used in locations with a two pallet stacking design were one shelf is placed right behind another with no aisle between them.
SCALES:
Enables operators to simultaneously weigh and transport pallets, eliminating the need to interrupt transport to travel to scales, and can be obtained in legal-for-trade weights for operations that bill by weight.
SINGLE-DOUBLE FORKS:
Allow movement of a single pallet or platform or two pallets side by side. With the correct attachment/s a single forklift can be used for multiple specialist materials handling tasks alongside normal lifting tasks, thus reducing the need for owning a specialist unit alongside a normal unit and the larger running and maintenance costs associated with multiple units.
SNOW PLOW:
Snow plows are used to remove snow and redistribute it; however, this attachment can be used with other loose kinds of material.
SKIPS:
Skips facilitate fast and safe removal of waste to the proper waste or skip compactor. Skips are either a bottom-emptying model or a roll-forward type.
BOOMS AND JIBS:
Allow for extended reach of a forklift to transport suspended loads or loads that are stacked high or deep. They are available in different setups such as reach over and precision lifting or low profile fixed and extendable lengths.
Forklift Attachment PDF
